Revolution (SM-1000) is a revolution in modern marine coatings technology. The single stage (no-mix) formula produces a remarkably attractive finish that must be seen to appreciate. It has a unique soft, smooth appearance yet it is deceptively hard and durable. The low odor formula produces a nontoxic finish that is forgiving and easy to apply. It self-levels like no other marine paint in brush and roll applications and is easily sprayed. Independent test data confirms its spectacular performance; achieving 40+ year lifespan in accelerated constant submersion durability testing commissioned by Siemens and Westinghouse. The exceptionally smooth finish may improve vessel speed by as much as 14% saving fuel and time in transit. Independent tests confirm compelling increases in vessel speed and fuel economy. Was there anything else on your wish list?

Withstands intense UV, high heat (400F), corrosive chemicals, acids, alkalis and staining agents. May be wet sanded and buffed. Acceptable for brush, roll or spray applications. Dry to the touch in 1 hour, recoatable in 6-12 hours - temperature dependant. Dries hard in 24 hours. Dark colors may dry and cure slower. Sand between coats after 48 hours. Pot life: Not applicable. Covers 400 square feet per gallon. See label and application instructions for further information. Available in 100 colors, gloss and satin. Custom colors available on request for an additional $10.00 per gallon.  May be applied to existing paint in sound condition without primer.

Recommendations: Recommend applying two or more thin coats applied at 2 mils max WFT to achieve a minimum DFT of 3.4 mils. Brush: recommend natural bristle brushes. Roller: Recommend high quality dense foam roller covers. Spray: Recommend small-medium size tip.

Thinner: All applications will require 10-20% dilution; See (SM-101 Leveling Thinner) do not substitute

Cleaner: Recommend SM-695 Etching Cleaner for fiberglass, aluminum, concrete and prepared steel surfaces. Where rust is evident use SM-5679 Phos-Pro Rust Converting Cleaner.

Primer:

     Aluminum, galvanized and Stainless: Use SM-117 Pre-Wash Primer in combination with any other Supermarine primer.  

     Fiberglass: SM-664D Etching Primer or SM-787 Mono Epoxy Primer.

     Steel, iron & concrete: SM-7390 Formula 150 Epoxy Primer or SM-787 Mono Epoxy Primer.

     Wood: SM-664D Etching Primer or SM-787 Mono Epoxy Primer.
 

Slip Resistance: For added slip resistance add 8 ounces SM-630 Pro-Tex, or Gaco-Grip.

Accelerate/Harden: See SM-160 Accelerator/Hardener.

Clean up: Clean with acetone or SM-101 Thinner. Refer to Application Instructions Sheet, Product Data Sheet, label directions or contact us for additional information.