Camo-Coat meets or exceeds government specification number TT-E-527 so you know you are getting the best! Camo-Coat produces a highly durable lusterless enamel suitable for use on the interior and exterior of all types of marine surfaces, vehicles and equipment. Acceptable for use above and below the waterline on trailered boats.  Camo-Coat may be applied to ferrous and non-ferrous metals, fiberglass and wooden substrates. It is used widely as a marine and equipment enamel finish that withstands all types of weather conditions. The fully cured finish can withstand repeated washing and normal everyday abuse. It has proven its performance in various marine, industrial and commercial maintenance fields. Withstands salt spray, impacts and resists rust. Excellent when used as non-reflective interior or exterior drab enamel.

• Produces a lusterless (authentic drab) finish according to military specifications.
• Provides superior adhesion, hardness and durability.
• Acceptable for seasonal submersion duty.
• Spray: up to 500 sq ft per gallon. Brush & Roll up to 400 sq ft per gallon.
• Self leveling formula reduces brush and roller marks.
• Withstands temperatures from -50F to 350F.
• Allows low temperature applications down to 40F.
• Available in 100 colors.

Stats: Dry to the touch in one hour. Tack free in 4-6 hours, time to re-coat 12 hours, dries hard in eight hours. Volume solids: 36-42% depending upon color*.  V.O.C.: 450 grams per liter. Available in 100 marine paint colors. Available in the Federal 595 Colorant system. Custom colors are available on request. Practical coverage is 300-500 square feet per gallon depending on application. Clean up or thin if necessary with SM-101 Thinner. Apply by brush, roller or spray. Available in quart, gallon and five gallon cans.

Recommended preparation: Refer to Application Instructions Sheet included with order, label directions and standard industry application practices. For best results remove old paint, loose scale, wax, oil and contaminates. Sand or scuff all surfaces prior to the application of any primer or coating.

Fiberglass, aluminum, concrete, masonry and stainless steel, galvanized steel- strongly recommend the use of SM-695 Etching Cleaner.

All wood surfaces must be thoroughly cleaned and dry before the application of primer or coatings.

Steel: Where rust is evident recommend SM-5679 Phos-Pro Rust Converting Cleaner. All surfaces must be thoroughly dry and free of contaminates before the application of any primer or marine paint.

Recommended primers:

Aluminum, galvanized and stainless steel - SM-117 Pre-Wash Primer  in combination with SM-664D Etching Primer.

Steel & iron: SM-7390 Formula 150 Epoxy Primer or SM-664D Etching Primer.

 Concrete & masonry- SM-7390 Formula 150 Epoxy Primer or SM-664D Etching Primer.

Wood - SM-664D Etching Primer.

Thin & clean up: Use only with factory recommended thinner, SM-101 Thinner. Clean all equipment thoroughly with SM-101 Thinner.

Accelerate/Harden: See SM-160 Accelerator/Hardener