Supermarine Mono-Coat Epoxy Clear (SM-2020)

makes painting with epoxy easier than ever. It has quickly become a favorite of both the professional and the do-it-yourselfer because it eliminates the difficulty and hassle of mixing, induction time and the limited pot life that comes with catalyst cured two component epoxies. An advanced formula that produces an effective barrier to water and chemicals. It provides a high level of corrosion and chemical resistance while creating an effective barrier coat on a wide variety of surfaces in a marine environment. 

Withstands long term submersion, heat (350F), corrosive chemicals, spilled fuel and staining agents. May be wet sanded and buffed. Acceptable for brush, roller-coat or spray applications. Brush: recommend natural bristle brushes. Roller: Recommend high quality dense foam roller covers. Spray: Recommend small-medium size tip. Dry to the touch in 1 hour, recoatable in 12 hours - temperature dependant. Dries hard in 24-48 hours. Sand between coats after 48 hours. Mixing ratio: N/A. Pot life: N/A. Covers 250-300 square feet per gallon. See label and application directions for further information. Available in 100 colors. Custom colors available on request for an additional $10.00 per gallon. Available in gloss or satin.

Recommendations: Recommend applying two or more coats to achieve a minimum DFT of 4 mils. Most applications will require dilution; See (SM-101 Thinner) do not substitute.

Cleaner: Recommend SM-695 Etching Cleaner for fiberglass, aluminum, concrete and prepared steel surfaces. Where rust is evident use SM-5679 Rust Converting Cleaner.

Primer: Aluminum, galvanized and Stainless: Use SM-117 Pre-Wash Primer in combination with any other Supermarine primer. Fiberglass use SM-664D Etching Primer or SM-780 Mono Epoxy Primer. Steel, iron & concrete: SM-7390 Formula 150 Epoxy Primer or SM-787 Mono Epoxy Primer. Wood: See SM-664D Etching Primer.

Slip Resistance: For added slip resistance add 8 ounces SM-630 Pro-Tex, 1 lb Tred-Tex or Gaco-Grip.

Clean up: Clean with Lacquer Thinner.

Accelerate/Harden: See SM-160 Accelerator/Hardener. Refer to Application Instructions Sheet, Product Data Sheet, label directions or contact us for additional information.