Supermarine Spar Varnish beautifies and protects marine woods while allowing the texture and grain to show through. It produces a protective film that is resistant to peeling and cracking on wood or metals. Excellent for quick touch ups and repairing scrapes and dings on woodwork topside or in the cabin.  Apply it with confidence on teak, oak, mahogany, and a variety of metals. It produces a clear natural looking, semi-gloss protective finish. Use it on wooden decks, doors, trim, in on paneling, cabinets and furniture. It can be brushes, rolled or sprayed. Two to three coats or more are recommended for best results on untreated wood.

• A military formula that out performs “dealer brands”.
• May be applied by brush, roller or sprayed.
• Allows the beauty of wood grain to show through.
• Protect metals form the damaging effects of UV and salt air.
• Features the highest quality resins available.
• Resists discoloring, yellowing and fading.
• Resists cracking and peeling.
• Provides good protection and durability.

Stats: Intended for use on wood or metal surfaces. Coverage is approximately 400-500 square feet per gallon. Best when sprayed, however, it can be brushed or rolled. Dry to the touch in 2-4 hours. Recoat in 24 hours. Cleans up easily. Available in Semi-Gloss. Available in quart or one gallon cans.

Recommended preparation: Refer to Application Instructions Sheet included with order, label directions and standard industry application practices. For best results remove old varnish, paint, loose scale, wax, oil and contaminates. All surfaces must be thoroughly dry and free of contaminates before the application of Supermarine Spar Varnish. Pre-clean metal with SM-695 Etching Cleaner or rusty metal with SM-5679 Phos-Pro Rust Converting Cleaner.

Recommended primers: None.

Thin & clean up: SM-101 Thinner