Quart	List $59.95	Our Price   $47.96
1 Gallon	List $172.95	Our Price $138.36
5 Gallons	List $844.95	Our Price $675.96
MSDS		Product Data Sheet

Supermarine Mono-Coat Epoxy (SM-2020) makes getting the job done right the first time quicker and easier than ever before. It has quickly become a favorite of both the professional and the do-it-yourselfer because it eliminates the difficulty of mixing multiple components together, induction time and limited pot life associated with traditional two component epoxies. It’s an easy to use advanced formula that produces an effective barrier to both moisture and vapors on virtually any marine surface.

Mono-Coat Epoxy is easier to apply it lasts longer and saves you money on scheduled maintenance costs.  It provides a high level of corrosion and chemical resistance while creating an effective barrier coat on a wide variety of surfaces in a marine environment. It achieves a highly durable high-build protective epoxy film that quickly self levels to an exceptionally smooth rock hard finish. The cured epoxy-ester film retains its color and gloss better than typical two component epoxy reducing the chance of chalking and yellowing.

• Eliminates the need of mixing multiple components together.
• An effective barrier to moisture and vapors.
• Mono epoxy-ester formula reduces chalking and color fade.
• Provides superior adhesion, hardness, chemical resistance and durability.
• Buffing easily removes mars and abrasions. 
• Self leveling formula reduces brush and roller marks.
• Lead free and non-toxic when dry so it is safe to you and the environment.
• Produces an unusually smooth finish.
• Available in 100 colors plus clear. Available in Satin or gloss. 

Stats: Dry to the touch in 2-3 hours. Best when two or more coats are applied. Recommended wet film thickness is 4-5 mils. Recommended DFT is 4 mils. Pot life: Not applicable. Very high in solid content so it will require thinning in most applications. Custom colors available on request for an additional $10.00 per gallon. Available in quart, gallon and five gallon containers. Available in satin and high gloss.

Recommended preparation: Refer to Application Instructions Sheet included with order, label directions and standard industry application practices. For best results remove old paint, loose scale, wax, oil and contaminates. Sand or scuff all surfaces prior to the application of any primer or coating.

      Fiberglass, aluminum, concrete, masonry and stainless steel, galvanized steel- strongly recommend the use of SM-664D Etching Primer

      All wood surfaces must be thoroughly cleaned and dry before the application of primer or coatings.

     Steel: Where rust is evident recommend SM-5679 Phos-Pro Rust Converting Cleaner. All surfaces must be thoroughly dry and free of contaminates before the application of any primer or marine paint.

Recommended primers:

     Aluminum, galvanized and stainless steel- SM-117 Pre-Wash Primer in combination with SM-787 Mono-Coat Epoxy Primer, SM-664D Etching Primer..

     Steel & iron: SM-787 Mono-Coat Epoxy Primer, SM-7390 Formula 150 Epoxy Primer  or SM-664D Etching Primer.r.

     Concrete & masonry- SM-787 Mono-Coat Epoxy Primer, SM-7390 Formula 150 Epoxy Primer.

     Wood- SM-787 Mono-Coat Epoxy Primer, SM-664D Etching Primer..

Thin & clean up: Use only with factory recommended thinner, SM-101 Thinner. Clean all equipment thoroughly with SM-101 Thinner or acetone.

Accelerate/Harden: See M-160 Accelerator/Hardener.