|
Floor-Grip
(SM-222) is something you won’t find anywhere else! It’s
a rock-hard non slip marine coating that features three
different sizes of aggregate added to the durable
industrial-marine alkyd base to produce an attractive
finish sure to get attention. Floor-Grip creates a
beautiful non-slip marine surface unlike anything you
have seen before. Boaters, fishermen, major hotel
chains, public pools, and businesses love it because it improves safety, lowers
liability and produces a very attractive finish that is
tough enough to meet the demands of high traffic and
easy enough to walk on with bare feet.
Floor-Grip saves work and time because it eliminates the
need for mixing multiple components together and may be
applied to may surfaces without the need for primer. It
produces a beautiful surface that adds texture and is
resistant to color fade, abrasion and the effects of
ponding water. It will fill and seal small cracks. It is
considerably harder, more durable and longer lasting
than typical non slip coatings. It adheres to most any
surface including steel, concrete, asphalt, ferrous and
non-ferrous metals and masonry while providing a durable
non-skid surface that has superior resistance to
abrasion, marring, chipping and cracking. Not
recommended for: (See SM-333 Posi-Trak for
wood applications). Not for continual immersion service.
Available in one gallon containers.
-
·
Pre-mixed non-skid aggregates saves work and time.
-
·
Acceptable for use in marine environments.
-
·
Features three different sizes of aggregates.
-
·
Produces an exceptionally hard impact and scuff
resistant finish.
-
·
Maintains its color and gloss without chalking yellowing
or fading.
-
·
Resists cracking and peeling.
-
·
Provides superior adhesion, hardness and durability.
-
·
Easy application; just brush or roll it on.
Stats: Covers 50-75
square feet per gallon to achieve the desired 25-30 mil
dry film thickness. Easy application, brush or roll it
on depending on surface and specific application
requirements. Best when applied with a
texture roller cover as
seen on our supplies page. Dry to the touch in 30
minutes-1 hour. Available in 100 floor paint colors.
Custom colors available on request for an additional
$10.00 per gallon.
Recommended preparation:
For best results remove old paint, loose scale, grease,
oil and contaminates. Sand, grind, bead blast or
power-wash prior to the application of any cleaner or
primer.
Etch Concrete, fiberglass and aluminum with
SM-695
Etching Cleaner.
When painting cement, wood or coating concrete, surfaces
must be thoroughly dry before application.
Recommended primers:
Porous concrete & masonry
-None.
Glazed tile, fiberglass,
aluminum and composite materials-
SM-664D Etching Primer.
Thin & clean up:
SM-605 Thinner. |
