|
|
|
|
|
Solvents,
Thinners and Cleaners
Thinners |
 |
Leveling Thinner
(SM-101)
is a proprietary blend of solvents that include effective
conditioning and drying agents. For best results use only
where recommended. It thins, conditions and improves the
viscosity, leveling properties, dry and cure times while
enhancing the application of paint and primer where
recommended.
MSDS
|
Quart |
List
$17.95 |
Our Price
$14.36 |
 |
|
Gallon |
List
$47.95 |
Our Price
$38.35 |
|
|
5 Gallon |
List
$229.95 |
Our Price
$183.96 |
|
|
|
|
Quick-Dry
Synthetic Thinner (SM-605)
A proprietary formula that speeds the flash time. Use where
recommended for best results. It thins, conditions and
improves application of Top Secret paint and coatings.
Enhances the penetration and leveling qualities of other
coatings. Use only where recommended. Use for clean up.
Note: For best results use with recommended TOP SECRET
products. A synthetic fast dry thinner that thins and
cleans spills and tools. Not recommended for use with TS-100
1-Part Epoxy or TS-4.
MSDS
|
Quart |
List
$17.95 |
Our Price $14.36 |
|
|
Gallon |
List
$47.95 |
Our Price $38.36 |
|
|
5 Gallon |
List
$229.95 |
Our Price $183.96 |
|
|
|
|
Blended Thinner
(SM-620)
A
proprietary
solvent blend for use with recommended products. Helps
prevent moisture blushing without retarding the dry time of
the product. A thinner-Reducer that has been adjusted for
electrical resistance value compatible with most
electrostatic spraying operations. Also compatible with
nitrocellulose lacquers. May be used as a thinning solvent
for when a slightly slower evaporating rate is desired. Not
recommended for use with TS-4 Urethane Reinforced Alkyd or
TS-100 1-Part Epoxy. MSDS
|
Quart |
List
$22.95 |
Our Price $18.36 |
|
|
Gallon |
List
$55.95 |
Our Price $44.76 |
|
|
5 Gallon |
List
$259.95 |
Our Price $207.96 |
|
|
|
Cleaners and Strippers |
|
|
Paint
Stripper
(SM-646)
A fast acting water-based paint stripper that is very
effective. It contains no caustic, acid, or flammable
solvent. This product readily removes paint, varnish,
lacquer, baked enamel and shellac safely from most surfaces.
It can be used on concrete, metal, wood and glass.
Intended Use: For removing paint, varnish, lacquer,
baked enamel, or shellac from concrete, metal, wood, or
glass.
MSDS
|
Quart |
List
$19.95 |
Our Price $15.96 |
|
|
Gallon |
List
$54.95 |
Our Price $43.96 |
|
|
5 Gallon |
List
$264.95 |
Our Price $211.96 |
|
|
 |
Etching Cleaner
(SM-695)
cleans and removes lime, rust and contaminates from
concrete, metal fiberglass, aluminum and masonry. It is
effective and fast acting. Use it and watch oil, grease,
dirt, exhaust and chemical stains disappear quickly and
completely. Also attacks rust, corrosion and oxidation from
screw threads, grooves and crevices as well as smooth
surfaces.
.
This is an
excellent pre-treatment solution to be used on concrete
floors prior to application of coatings and sealers by
removing unwanted contaminants from the floor and
neutralizing lime and by-products on the surface which may
seriously impair the coatings’ ability to form a good bond
to the concrete. Tested and approved by aluminum
manufacturers for use on all aluminum products. Removes
easily and safely exhaust and chemical stains, oxides and
corrosion from aluminum, zinc and cadmium plate as well as
iron and steel.
.
ADVANCE \d4A Phosphoric Acid
based Metal & Concrete Pretreatment Solution. Intended Use:
Removes stains, oxides and corrosion from a wide variety
of surfaces. Available in quart, gallon and five gallon
containers.
Note: Recommend TS-104 Seal-It!
for areas where moisture,
mold, mildew, water intrusion and hydrostatic pressure are
present.
MSDS
|
Quart |
List
$14.95 |
Our Price $11.96 |
|
|
Gallon |
List
$36.95 |
Our Price $29.56 |
|
|
5 Gallon |
List
$174.95 |
Our Price $139.96 |
|
|
|
|
|
|
Solvents |
|
|
Accelerator/Hardener
(SM-160)
An optional
accelerator/hardener for use with TS-4 Urethane Reinforced
Alkyd and TS-100 1 Part Epoxy coatings, including 1-Part
Epoxy Clear, when increased hardness, scuff resistance, fast
drying, curing and protection from hot tire pick up is
desired. When added to a top coating according to label
directions it will speed dry and cure times as well as the
overall hardness, corrosion and abrasion resistance of the
coating. Use this product in floor applications where drying
and curing times are limited.
INSTRUCTIONS: Add three ounce container to 1 quart, 1/2 pint
per gallon or one quart to five gallons. Reduce dosage by
50% with 1-Part Epoxy Clear on wood. Pot-life is
approximately 2 hours. Color: Clear. Clean up with xylol.
MSDS
|
3 oz |
List
$19.95 |
Our Price
$15.96 |
|
|
Half Pint |
List
$47.95 |
Our Price
$38.36 |
|
|
Quart |
List
$220.95 |
Our Price $176.76 |
|
|
|
|
|
