Ironside Urethane (SM-266) rests alone atop the performance pyramid. If you want the best look no further. It is versatile, highly durable and produces an attractive finish quickly and easily. A high solid formula intended to provide superior resistance to corrosive chemicals, intense UV, high impacts, abrasions, saltwater, long term submersion, grease, oil, solvents and the effects of harsh weather. Guaranteed to withstand spilled fuel or battery acid for 7 days with little or no effect!  A self leveling formula producing superior gloss retention and clarity in the harshest applications. Use it on virtually any interior or exterior marine surface without the worry of yellowing or chalking. Acceptable for use above and below the waterline on prepared steel, aluminum, fiberglass, wood, concrete or composite materials.

Withstands long term submersion, intense UV, heat (500F), corrosive chemicals, fuels, acids, alkalis and staining agents. May be wet sanded and buffed. Acceptable for brush, roller-coat or spray applications. Brush: recommend natural bristle brushes. Roller: Recommend using high quality low nap roller covers. Spray: Recommend small-medium size tip. Acceptable for electrostatic spray. Dry to the touch in 30 minutes to 1 hour, recoatable in 6 hours - temperature dependant. Dries hard in 8 hours. Sand between coats after 48 hours. Mixing ratio: 7:1 (by volume) with Part B (Induction Time: 15 minutes). Pot life: 5 hours. Covers 250-300 square feet per gallon. See label and application directions for further information. Available in gloss or satin.

Recommendations: Recommend applying two or more coats to achieve a minimum DFT of 4 mils. Most applications will require dilution; See (SM-605 Thinner) do not substitute.

Cleaner: Recommend SM-695 Etching Cleaner for fiberglass, aluminum, concrete and prepared steel surfaces.

Primer: N/A.

Slip Resistance: For added slip resistance add 8 ounces SM-630 Pro-Tex, 1 lb Tred-Tex or Gaco-Grip.

Clean up: Clean with Lacquer Thinner. Refer to Application Instructions Sheet, Product Data Sheet, label directions or contact us for additional information.