Quart	List $97.95	Our Price  $78.96
Gallon	List $279.95	Our Price  $223.96
		MSDS

Supermarine Zinc-Plate (SM-5000) is absolutely loaded with Zinc! It has so much zinc in it you could open your own plating shop! Zinc-Plate can be used as either a heavy zinc primer or as a rust preventative protective top coating. It is a combination Organic-Inorganic Zinc Rich formulation supplied ready-mixed with Zinc Dust and Vehicle together to create a unique protective coating. Utilizes special components that produce a superior mechanical and chemical bond while providing outstanding resistance to rust, electrolysis, weathering and high heat. A high zinc content industrial marine coating intended for use on bare ferrous metals. It is acceptable for use in marine environments, or where there is extreme weather or in industrial or manufacturing applications. Use it to protect weathered galvanized materials and raw steel surfaces.

An anti-corrosive primer/paint that withstands corrosive chemicals, spilled fuel and staining agents. Acceptable for brush, roller-coat or spray applications. May be top coated with most vinyl coatings. Covers 225-250 square feet per gallon. Dry to the touch in 30 minutes. Tack free in one hour. Allow 4 hours to recoat. Airless or conventional spray is the recommended application method. Airless tips should be approximately .027 inch orifice. Apply one coat at 2.3 mils. Weight solids 81%. Available only in zinc-gray color See label and application directions for further information. NOTE: WEIGHT PER GALLON: 22 lbs. per gal.

Recommendations: Recommend applying two or more coats to achieve a minimum DFT of 5 mils.

Thinner: Not typically required. Use SM-605 Thinner, do not substitute.

Cleaner: Recommend SM-695 Etching Cleaner for aluminum and prepared steel surfaces. Where rust

Primer: Use SM-117 Pre-Wash Primer in combination with any other Supermarine primer. Steel, iron: Not required.

Clean up: Clean with SM-605 Thinner.