|
Mono-Coat Epoxy
(SM-2020)
makes painting with epoxy easier than ever.
It has quickly become a favorite of both the professional
and the do-it-yourselfer because it eliminates the difficulty
and hassle of mixing, induction time and the limited pot life
that comes with catalyst cured two component epoxies. An
advanced formula that produces an effective barrier to water and
chemicals. It provides a high level of corrosion and chemical
resistance while creating an effective barrier coat on a wide
variety of surfaces in a marine environment.
Withstands long term submersion, heat (350F), corrosive
chemicals, spilled fuel and staining agents. May be wet sanded
and buffed. Acceptable for brush, roller-coat or spray
applications. Brush: recommend natural bristle brushes. Roller:
Recommend high quality dense foam roller covers. Spray:
Recommend small-medium size tip. Dry to the touch in 1 hour,
recoatable in 12 hours - temperature dependant. Dries hard in
24-48 hours. Sand between coats after 48 hours. Mixing ratio:
N/A. Pot life: N/A. Covers 250-300 square feet per gallon. See
label and application directions for further information.
Available in 100 colors. Custom colors available on request for
an additional $10.00 per gallon. Available in gloss or satin.
Recommendations:
Recommend applying two or more coats to achieve a minimum DFT of
4 mils. Most applications will require dilution; See (SM-101
Thinner) do not substitute.
Cleaner: Recommend
SM-695 Etching Cleaner for fiberglass, aluminum,
concrete and prepared steel surfaces. Where rust is evident use
SM-5679 Rust Converting Cleaner.
Primer:
Aluminum, galvanized and Stainless: Use
SM-117 Pre-Wash Primer in combination with any other
Supermarine primer.
Fiberglass use
SM-664D Etching Primer or
SM-780 Mono Epoxy Primer.
Steel, iron & concrete:
SM-7390 Formula 150 Epoxy Primer or
SM-787 Mono Epoxy Primer.
Wood: See
SM-664D Etching Primer.
Slip Resistance: For added slip resistance add 8 ounces
SM-630 Pro-Tex, 1 lb Tred-Tex or Gaco-Grip.
Clean up: Clean with Lacquer Thinner.
Accelerate/Harden:
See SM-160
Accelerator/Hardener. Refer to
Application Instructions
Sheet, Product Data Sheet, label directions or
contact us for additional information.
MSDS
.
|
